Comfort Aire HVAC

Comfort-Aire Heat Pump Training

RSVP Required

Tuesday, August 23, 2022

In Clifton Park NY

Choose one of two sessions

 

Session 1: 8 AM – 11:30 AM
Session 2: 1:00 PM – 4:30 PM

RSVP to reserve your seat

Session

9 + 13 =

Topics covered include:

2023 DOE Efficiency Changes

Higher AC SEER & Heat Pump HSPF requirements and new equipment changes
New SEER2 HSPF2 Rating system

Split Heat Pump Applications

Comfort-Air Heat Pump Options features and benefits
Hybrid Heat: Heat Pump with Gas or Oil furnace
All Electric Heat Pump
Manufacture/Mobile Home heat pump application
AHRI Matchup
Sizing Heat Pump and balance point calculation
Installation, Startup overview
National Grid and NYSEG Incentive and Rebate Programs

Mini-Split Heat Pump Applications

Comfort-Aire low temp options, features, and benefits
Sizing, application, installation, and startup overview
National Grid and NYSEG Incentive and Rebate Programs

DUCTLESS MINI-SPLITS

Ductless mini-split systems are a great solution to a wide variety of installation challenges, giving contractors the ability to add cooling and heating in locations that previously seemed impossible. They’re ideal when installing ductwork is difficult, prohibitively expensive, or simply impractical. Residential and commercial structures, new construction and existing buildings, are candidates for mini-splits. Basically a mini-split does away with the need for ductwork. Like a regular split system A/C or heat pump, the condenser is located outdoors; one or more air handlers are placed indoors. The two are connected by electrical and refrigerant lines that run through a small hole in an exterior wall, generally 3” in diameter or less.

Single Zone Units

comfort-aire

Warranty—6 years on compressor, 5 years on parts

(Some limitations apply; see printed warranty for details.)

SVh
DV-series

Multi Zone Units

Comfort Aire multi Zone

Our InverterFlex® multi-zone units let you condition one up to five rooms with just one outdoor unit (depending on model). The contractor can design a system that best meets the load requirements of each room being conditioned because indoor air handlers can be mixed and matched—all five types of units shown can be used in the same installation.

These 9,000, 12,000, 18,000, 21,000 and 24,000 BTUH indoor units can be mixed, up to the point that their combined capacity reaches the total allowable system capacity—see the chart inside. All units must operate in the same mode except “fan” only can always be selected. True zone control is possible because each air handler operates independently and has its own wireless remote.

multi-zone

FEATURES
(Varies according to type of indoor unit)
• Auto Swing—Continually adjusts air direction for a gentle, breeze like effect preferred by most people
• Multiple Modes—Cooling, heating, fan only, dehumidification only, plus:
• Sleep mode
• 24-hour timer
• Turbo mode
• Auto mode
• Intelligent Pre-Heating—Enhances comfort by preventing cold air blow
• Auto Operation—Automatically selects the mode required to maintain a constant temperature/humidity level
• “Follow” Function—Senses temperature at the remote and adjusts air flow for comfort and efficiency at its location
• Superior Filtration—Air filters are designed to help enhance indoor air quality
• Auto Defrost—Defrosts only when necessary to save energy, limit downtime
• Self-Clean Mode—Dries out indoor unit when not in use to prevent mold growth
• Low Ambient Operation

MINI-SPLITS AND
INDOOR AIR QUALITY

According to the EPA, the air inside our homes is often more polluted than outside air. What’s needed to protect yourself from airborne contaminants is a high quality filtration system, and that’s just what you get with all ductless mini-splits. In fact, our high wall mount indoor units are equipped with a superior filtration system. The nano silver ion filter releases silver ions that eliminate bacteria in the air, while the gold fin coating on the evaporator itself inhibits the growth and spreading of bacteria into the living space. Ceiling cassettes also have a special evaporator coating to prevent the breeding and dissemination of airborne bacteria.

Additionally, the units can be operated in the dehumidification mode without cooling or heating. This removes excess humidity from the indoor air, one of the keys to preventing the growth of mold, mildew and other contaminants.

indoor air filter

GAS FURNACES

Efficient and reliable heat exchangers, hot surface igniter, integrated furnace control with on-board diagnostics. Equipped with ECM constant torque motor. Low profile cabinet is ideal for replacements. All units are A/C ready.

Upgraded Unitary Parts Warranty

Comfort Aire has upgraded their current basic parts warranty from 5-Year to 6-Year on most* Unitary products. This will also serve to provide consistency among the product componentry as well. See changes implemented below – highlighted for convenience.

Comfort Aire Warranty